customized bauer ik280 High pressure air compressors

with Explosion Proof CLASS ONE – DIV Two certification

for breathing air or Seismic acquisition

Quick Facts:
Compressor Model ASC100-E-EXP// (Bauer IK280)
Dimensions: 108” x 92” x 65” (Apprx 6,680 lbs)
– 100 CFM @ 2,200 PSI

Power Requirements:
460 VAC 150 AMP Service; FLA 96 Amps equipped with WYE/DELTA start

Where originally equipped with a 100HP motor, now outfitted with a 75HP motor. As for the frame, it has remained the same with the exception of the new certified pad eyes which are in the same position, but on top of the I-beam verses the side.

Air Storage and Regulation Unit Model ASC-RCK-4ASME/2REG

Dimensions: 36” x 36” x 72”

Power requirements if unit is equipped with Glycol Injection Unit:
46 VAC, 10 AMP Service

They have been customized for Shell in the Arctic.

Class One Division Two location certified

A Class I Hazardous Location is one in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.

A Division 2 location flammable gases or vapors are not normally present in an explosive concentration (but may accidentally exist).

To Read, click here:
Hazardous (Classified) Locations – Occupational Safety & Health Administration (OSHA)